Isothermal Sandwich panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Cs3_N: Micro-ribbing on two sides
GS 112 Cs3_C: Semi-smooth (with coplanar joint)
GS 112 Cs3_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Ds3_N: Micro-ribbing on two sides
GS 112 Ds3_C: SSemi-smooth (with coplanar joint)
GS 112 Ds3_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joints, produced using the one-shot air intake injection system, in compliance with European regulation EN 14509, are appropriate for the realization of cold rooms at positive or negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
PGS 112 Bs3_N: Micro-ribbing on two sides
PGS 112 Bs3_C: Semi-smooth (with coplanar joint)
PGS 112 Bs3_L: Smooth on two sides

Sandwich panels with tongue and groove joint, produced using the one-shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at positive or negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly. A perfect union between panels and easy assembly is supported by the use of camlocks.

Available in 3 models:
PGS 112G Bs3_N: Micro-ribbing on two sides
PGS 112G Bs3_C: Semi-smooth (with a coplanar joint)
PGS 112G Bs3_L: Smooth on two sides

Sandwich panels with tongue and groove joint produced with an air intake one-shot system, consisting of 2 laminates made of PRFV (polyester reinforced with glass fiber also known as fiberglass) between which high-density PUR foam is injected. Appropriate for the realization of cold rooms at both positive and negative temperatures, processing rooms, agricultural/food areas with highly aggressive agents such as dairies, cured meat factories, seafood/fish processing, and all food products in general.

Designed to provide excellent resistance to contact, thermal insulation, a pleasing appearance, hygiene, and easy assembly, perfect panel union is ensured through camlocks, which also make assembly easier.

VH 112 is an innovative patented range of isothermal sandwich panels suitable for controlled temperature rooms.
The configuration of the joint and the Glasincold antibacterial embossed finishing guarantee high hygiene performance for environments with a high risk of fungal and/or bacterial contamination. The VH 112 panels offer high resistance to knocks, high thermal insulation performance and are easy to install, and do not require the use of external components such as silicone or clips.

Composition:
2 polyester resin composite laminates reinforced with fiberglass (PRF), between which the insulating polyurethane is injected at high pressure with the “Air intake system one-shot” system.

Sandwich panels tongue-and-groove joint, with cam locks, manufactured in accordance with European standard EN 14509:2013, specifically designed for the construction of controlled temperatures and humidity rooms, food packaging rooms, clean rooms, ensure high performances of thermal insulation, mechanical strength, hygiene, and rapid assembling.

CRC uses a specific “linear” junction system between the panels and the other components that, unlike the “male-female” one, offer a high product versatility both as a wall panel and as a ceiling panel. Furthermore, this allows to increase and/or modify the cold rooms at any moment according to the needs.

The standard panels have both an internal and an external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,5 mm. The insulation among the panels is obtained by means of polyurethane foam (PUR) with a density of 43 Kg/m³.

All Boxcold floor panels have an internal finish in anti-slip grey PVC coated steel sheet, insulation in polyurethane foam (PUR) with a density of 43 Kg/m³ and a lower external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,6 mm.

0,6 mm steel sheet glued on a 12 mm wood composite.
Static capacity 4000 Kg/m2
Dynamic capacity 250 Kg
Punctual capacity 140 Kg

All Boxcold floor panels have an internal finish in anti-slip grey PVC coated steel sheet, insulation in polyurethane foam (PUR) with a density of 43 Kg/m³ and a lower external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,6 mm.

0,6 mm steel sheet glued on a 20 mm wood composite and PVC reinforcement spacers foamed in the shape of a honeycomb structure inside the panel.
Static capacity 6000 Kg/m2
Dynamic capacity 1500 Kg
Punctual capacity 300Kg

Lined and flat surface-type options.
Prepainted galvanized steel, stainless steel or PVC film laminated inner and outer sheet alternatives.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated cold storage panels, B-s1; d0 for PIR insulated cold storage panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,27 – 0,11 W/m2K depending on the panel thickness.
PUR and PIR insulation alternatives.
ISO, TSE, and CE quality certificates.

Lined and flat surface type options.
Prepainted galvanized steel, stainless steel or PVC film laminated inner and outer sheet alternatives.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated cold storage panels, B-s1; d0 for PIR insulated cold storage panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,27 – 0,11 W/m2K depending on the panel thickness.
PUR and PIR* insulation alternatives.
ISO, TSE, CE quality certificates and FM Approval Certificates.

• Natural Kraft Paper on the upper and lower surfaces.
• Fire performance according to TS EN 13501-1, B for PUR and PIR insulation board.
• Production flexibility at width 1 m, and any ordered length between 1 m - 3 m.
• Thickness options 50-60-80-100 mm • Compressive strength is 0,095 MPa, according to TS EN 826.
• Usage in roof, wall and floor insulation applications that require high compressive strength.
• Density PUR 38 kg/m3 (+/-2), PIR 40 kg/m3 (+/-2).
• Production at Sakarya factory.