Incold's isothermal sliding doors are the ideal solution for separating refrigerated rooms while preserving the temperatures inside the cold rooms, ensuring maximum energy savings.

Available thicknesses:
68 mm (mod. SC 07 TN)
92 mm (mod. SC 09 TN)
92 mm (mod. SC 09 BT)
121 mm (mod. SC 12 BT)

Incold's SC 2B two-leaf isothermal sliding doors are the ideal solution for separating refrigerated rooms while preserving the temperatures inside the cold rooms and ensuring maximum energy savings.

Available thicknesses:
92 mm (mod. SC2B 09 TN)
121 mm (mod. SC2B 12 BT)

Isothermal Sliding doors SC 09 TNG with rail passage available for positive temperatures only.

Available thicknesses:
92 mm (mod. SC 09 TNG)

Frameless sliding doors SC-L available for temperatures above +4 °C with ∆T < 16 °C with R.H. (Relative Humidity) < 60%.

Available thicknesses:
68 mm (mod. SC-L 07 TN)

Door for “Controlled Atmosphere” cold rooms for preservation and ripening where the internal temperature is not lower than -5°C; it guarantees the hermetic seal of the cold room.

Available thicknesses:
100 mm (mod. SC.AC 10 TN)

CE-F isothermal hinged doors with monolithic leaf available for both positive and negative temperatures.

Available thicknesses:
68 mm (mod. CE-F 07 TN)
92 mm (mod. CE-F 09 BT)

CE-M isothermal hinged doors with monolithic leaf and rotating handles available for both positive and negative temperatures.

Available thicknesses:
68 mm (mod. CE-M 07 TN)
92 mm (mod. CE-M 09 BT)
121 mm (mod. CE-M 12 BT)

CE-MG isothermal doors with magnetic closing devices for chiller and freezer rooms, opening radius of 180° with self-closing until 90°

Available thicknesses:
68 mm (mod. CE-MG 07 TN)
92 mm (mod. CE-MG 09 BT)
121 mm (mod. CE-MG 12 BT)

SI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ∆T ≤ 12°C, R.H. ≤ 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal. They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

SI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ∆T ≤ 12°C, R.H. ≤ 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal. They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

VVE & VV-EG semi-insulating doors are designed for installation in air-conditioned rooms with minimum working temperatures > 12°C, ∆T < 12°C, R.H. < 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal.
They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

VVF & VV-FG semi-insulating doors are designed for installation in air-conditioned rooms with minimum working temperatures > 12°C, ∆T < 12°C, R.H. < 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal.
They can be supplied for installation on the panel.

Available thicknesses:
40 mm

The semi-insulating doors VVPE - VVPEG (to-and-from in high-density polyethylene) are designed for installations in air-conditioned rooms with minimum working temperatures > 12 °C, ∆T < 12 °C, U.R. < 60% they can only be used as service entrances and not for uses requiring a hermetic and thermal seal. They can be supplied for installation on panels or brick walls.
High-density polyethylene is a sturdy material with excellent rigidity and resistance to impact. For this reason, VVPE doors are particularly suited to environments where there is heavy traffic of trolleys; polyethylene is also a non-toxic material and it has good chemical resistance.

The Transparent Flexible Doors Unika Visioflex are an effective barrier to the passage of air through isothermal doors in the event they remain open due to intensive traffic, whether pedestrian or trolleys. They offer maximum protection against heat loss, controlling energy consumption. They are also a valid solution in case a dividing door with maximum visibility is required.

The absence of posts allows optimization of the door opening, unlike the conventional “FLAP” doors. It is much more accessible compared to the traditional Strip Doors as it avoids the hassle of strips that fall against the operator, so passage is easier even when the user’s hands are full. They are easy to install and virtually maintenance-free.

The flap doors in PVC (flexible doors), available in a double-door version, consist primarily of a sturdy structure in galvanised steel (painted or optional stainless steel) that sustains a flexible skirt of transparent PVC, suitable for use with positive temperatures or, upon request, with low temperatures, conveniently reinforced in high-stress points and complete with a torsion-spring reclosing mechanism.

They are available in 3 different versions:
Manual (as described above), operates with a simple push.
Pneumatic touch, complete with an actuation device consisting of two-way pneumatic pistons that allow the doors to open with a light push, in both directions, with a spring catch.
Electro-pneumatic, complete with an actuation device consisting of one-way pneumatic pistons that allow the doors to open, in a single direction, following the activation of a remote control such as a photocell, radar, metal detector, button, or pull-cord, with a torsion-spring reclosing system.

The PVC strip curtains are suitable for separating different working areas and they serve as flexible barriers next to isothermal doors, to reduce the thermal loss or the entry of hot air (to prevent condensation) during the daily operation of opening and closing.

Available in 3 different versions:
ST LT
ST HY
ST PVC

With PVC flat frame and PVC side frame. CRC today boats a new production line developed thanks to the great expertise of its team and focused exclusively on the industrial door sector, both hinged and sliding type, for installation on panels and on masonry.

The standard Boxcold door has specific features designed to obtain the highest possible yield. Each door has a leaf with an aluminum perimeter profile, hinges with a ramp and possibility of height/depth adjustment, an outside handle with a key, and an inside handle with emergency push button.
A silicone rubber gasket along the perimeter is designed to allow the use of the door for cold rooms with and without a floor. For doors of thickness 10-12-14 cm (optional for thickness 8 cm), an anti-condensation electric heater along the door clear passage perimeter is supplied by default.

The standard Boxcold door has specific features designed to obtain the highest possible yield. Each door has a leaf with an aluminum perimeter profile, hinges with a ramp and possibility of height/depth adjustment, an outside handle with a key, and an inside handle with emergency push button.
A silicone rubber gasket along the perimeter is designed to allow the use of the door for cold rooms with and without a floor. For doors of thickness 10-12-14 cm (optional for thickness 8 cm), an anti-condensation electric heater along the door clear passage perimeter is supplied by default.