Multi is a range of modular and extendable cabinets and cold rooms.
It is characterised by vertical and horizontal edge profiles, which allow for both simple and complex configurations.
The edge profiles are rounded to eliminate the presence of sharp corners inside the cold room, guaranteeing ease of cleaning.
It is modifiable for future evolutions and allows the use of a few types of panels for infinite compositions.

Multi-cubed is a fully modular and extendable cabinet and cold room.
It is characterised by vertical and horizontal edge profiles, which allow for both simple and complex configurations.

Horizontal and vertical sheet metal edge profiles with polyurethane inside.
Angle caps.
Also available without a floor.
Wide range of edge profiles for complex compositions.
CE-certified cold rooms according to EN 14509.

Multi PVC is a fully modular and extendable cabinet and cold room.
It is characterised by vertical and horizontal edge profiles, which allow for both simple and complex configurations.

Horizontal and vertical sheet metal edge profiles with polyurethane inside.
Angle caps.
Also available without a floor.
Wide range of edge profiles for complex compositions.
CE-certified cold rooms according to EN 14509.

Multi Cabinet Cold Rooms is a fully modular and extendable cabinet and cold room.
It is characterised by vertical and horizontal edge profiles, which allow for both simple and complex configurations.

Horizontal and vertical sheet metal edge profiles with polyurethane inside.
Angle caps.
Also available without a floor.
Wide range of edge profiles for complex compositions.
CE-certified cold rooms according to EN 14509.

Upgrade your cold storage with our customizable, energy-efficient Modular Cold Rooms. Ideal for various industries, including food and beverage, pharmaceuticals, and floriculture, our cold rooms offer unparalleled flexibility and reliability.

Experience optimal cold storage with our customizable Modular Cold Rooms. Perfect for food, pharmaceuticals, floriculture, and more, they ensure superior temperature control and product preservation.

Experience optimal cold storage with our customizable Modular Cold Rooms with two doors. Perfect for food, pharmaceuticals, floriculture, and more, they ensure superior temperature control and product preservation.

Our Modular Cold Rooms with four doors provide the ultimate cold storage solution for diverse industries, including food and beverage, pharmaceuticals, and floriculture. Designed for customization and scalability, they offer superior temperature control and energy efficiency.

Our Modular Cold Rooms with Six doors provide the ultimate cold storage solution for diverse industries, including food and beverage, pharmaceuticals, and floriculture. Designed for customization and scalability, they offer superior temperature control and energy efficiency.

Our Modular Cold Rooms with three doors provide the ultimate cold storage solution for diverse industries, including food and beverage, pharmaceuticals, and floriculture. Designed for customization and scalability, they offer superior temperature control and energy efficiency.

Isothermal Sandwich panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Cs3_N: Micro-ribbing on two sides
GS 112 Cs3_C: Semi-smooth (with coplanar joint)
GS 112 Cs3_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Ds3_N: Micro-ribbing on two sides
GS 112 Ds3_C: SSemi-smooth (with coplanar joint)
GS 112 Ds3_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joints, produced using the one-shot air intake injection system, in compliance with European regulation EN 14509, are appropriate for the realization of cold rooms at positive or negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
PGS 112 Bs3_N: Micro-ribbing on two sides
PGS 112 Bs3_C: Semi-smooth (with coplanar joint)
PGS 112 Bs3_L: Smooth on two sides

Sandwich panels with tongue and groove joint, produced using the one-shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at positive or negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly. A perfect union between panels and easy assembly is supported by the use of camlocks.

Available in 3 models:
PGS 112G Bs3_N: Micro-ribbing on two sides
PGS 112G Bs3_C: Semi-smooth (with a coplanar joint)
PGS 112G Bs3_L: Smooth on two sides

Sandwich panels with tongue and groove joint produced with an air intake one-shot system, consisting of 2 laminates made of PRFV (polyester reinforced with glass fiber also known as fiberglass) between which high-density PUR foam is injected. Appropriate for the realization of cold rooms at both positive and negative temperatures, processing rooms, agricultural/food areas with highly aggressive agents such as dairies, cured meat factories, seafood/fish processing, and all food products in general.

Designed to provide excellent resistance to contact, thermal insulation, a pleasing appearance, hygiene, and easy assembly, perfect panel union is ensured through camlocks, which also make assembly easier.

VH 112 is an innovative patented range of isothermal sandwich panels suitable for controlled temperature rooms.
The configuration of the joint and the Glasincold antibacterial embossed finishing guarantee high hygiene performance for environments with a high risk of fungal and/or bacterial contamination. The VH 112 panels offer high resistance to knocks, high thermal insulation performance and are easy to install, and do not require the use of external components such as silicone or clips.

Composition:
2 polyester resin composite laminates reinforced with fiberglass (PRF), between which the insulating polyurethane is injected at high pressure with the “Air intake system one-shot” system.

Sandwich panels tongue-and-groove joint, with cam locks, manufactured in accordance with European standard EN 14509:2013, specifically designed for the construction of controlled temperatures and humidity rooms, food packaging rooms, clean rooms, ensure high performances of thermal insulation, mechanical strength, hygiene, and rapid assembling.

CRC uses a specific “linear” junction system between the panels and the other components that, unlike the “male-female” one, offer a high product versatility both as a wall panel and as a ceiling panel. Furthermore, this allows to increase and/or modify the cold rooms at any moment according to the needs.

The standard panels have both an internal and an external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,5 mm. The insulation among the panels is obtained by means of polyurethane foam (PUR) with a density of 43 Kg/m³.

All Boxcold floor panels have an internal finish in anti-slip grey PVC coated steel sheet, insulation in polyurethane foam (PUR) with a density of 43 Kg/m³ and a lower external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,6 mm.

0,6 mm steel sheet glued on a 12 mm wood composite.
Static capacity 4000 Kg/m2
Dynamic capacity 250 Kg
Punctual capacity 140 Kg

All Boxcold floor panels have an internal finish in anti-slip grey PVC coated steel sheet, insulation in polyurethane foam (PUR) with a density of 43 Kg/m³ and a lower external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,6 mm.

0,6 mm steel sheet glued on a 20 mm wood composite and PVC reinforcement spacers foamed in the shape of a honeycomb structure inside the panel.
Static capacity 6000 Kg/m2
Dynamic capacity 1500 Kg
Punctual capacity 300Kg

Incold's isothermal sliding doors are the ideal solution for separating refrigerated rooms while preserving the temperatures inside the cold rooms, ensuring maximum energy savings.

Available thicknesses:
68 mm (mod. SC 07 TN)
92 mm (mod. SC 09 TN)
92 mm (mod. SC 09 BT)
121 mm (mod. SC 12 BT)

Incold's SC 2B two-leaf isothermal sliding doors are the ideal solution for separating refrigerated rooms while preserving the temperatures inside the cold rooms and ensuring maximum energy savings.

Available thicknesses:
92 mm (mod. SC2B 09 TN)
121 mm (mod. SC2B 12 BT)

Isothermal Sliding doors SC 09 TNG with rail passage available for positive temperatures only.

Available thicknesses:
92 mm (mod. SC 09 TNG)

Frameless sliding doors SC-L available for temperatures above +4 °C with ∆T < 16 °C with R.H. (Relative Humidity) < 60%.

Available thicknesses:
68 mm (mod. SC-L 07 TN)

Door for “Controlled Atmosphere” cold rooms for preservation and ripening where the internal temperature is not lower than -5°C; it guarantees the hermetic seal of the cold room.

Available thicknesses:
100 mm (mod. SC.AC 10 TN)

CE-F isothermal hinged doors with monolithic leaf available for both positive and negative temperatures.

Available thicknesses:
68 mm (mod. CE-F 07 TN)
92 mm (mod. CE-F 09 BT)

CE-M isothermal hinged doors with monolithic leaf and rotating handles available for both positive and negative temperatures.

Available thicknesses:
68 mm (mod. CE-M 07 TN)
92 mm (mod. CE-M 09 BT)
121 mm (mod. CE-M 12 BT)

CE-MG isothermal doors with magnetic closing devices for chiller and freezer rooms, opening radius of 180° with self-closing until 90°

Available thicknesses:
68 mm (mod. CE-MG 07 TN)
92 mm (mod. CE-MG 09 BT)
121 mm (mod. CE-MG 12 BT)

SI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ∆T ≤ 12°C, R.H. ≤ 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal. They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

SI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ∆T ≤ 12°C, R.H. ≤ 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal. They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

VVE & VV-EG semi-insulating doors are designed for installation in air-conditioned rooms with minimum working temperatures > 12°C, ∆T < 12°C, R.H. < 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal.
They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

VVF & VV-FG semi-insulating doors are designed for installation in air-conditioned rooms with minimum working temperatures > 12°C, ∆T < 12°C, R.H. < 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal.
They can be supplied for installation on the panel.

Available thicknesses:
40 mm

The semi-insulating doors VVPE - VVPEG (to-and-from in high-density polyethylene) are designed for installations in air-conditioned rooms with minimum working temperatures > 12 °C, ∆T < 12 °C, U.R. < 60% they can only be used as service entrances and not for uses requiring a hermetic and thermal seal. They can be supplied for installation on panels or brick walls.
High-density polyethylene is a sturdy material with excellent rigidity and resistance to impact. For this reason, VVPE doors are particularly suited to environments where there is heavy traffic of trolleys; polyethylene is also a non-toxic material and it has good chemical resistance.

The Transparent Flexible Doors Unika Visioflex are an effective barrier to the passage of air through isothermal doors in the event they remain open due to intensive traffic, whether pedestrian or trolleys. They offer maximum protection against heat loss, controlling energy consumption. They are also a valid solution in case a dividing door with maximum visibility is required.

The absence of posts allows optimization of the door opening, unlike the conventional “FLAP” doors. It is much more accessible compared to the traditional Strip Doors as it avoids the hassle of strips that fall against the operator, so passage is easier even when the user’s hands are full. They are easy to install and virtually maintenance-free.

The flap doors in PVC (flexible doors), available in a double-door version, consist primarily of a sturdy structure in galvanised steel (painted or optional stainless steel) that sustains a flexible skirt of transparent PVC, suitable for use with positive temperatures or, upon request, with low temperatures, conveniently reinforced in high-stress points and complete with a torsion-spring reclosing mechanism.

They are available in 3 different versions:
Manual (as described above), operates with a simple push.
Pneumatic touch, complete with an actuation device consisting of two-way pneumatic pistons that allow the doors to open with a light push, in both directions, with a spring catch.
Electro-pneumatic, complete with an actuation device consisting of one-way pneumatic pistons that allow the doors to open, in a single direction, following the activation of a remote control such as a photocell, radar, metal detector, button, or pull-cord, with a torsion-spring reclosing system.

The PVC strip curtains are suitable for separating different working areas and they serve as flexible barriers next to isothermal doors, to reduce the thermal loss or the entry of hot air (to prevent condensation) during the daily operation of opening and closing.

Available in 3 different versions:
ST LT
ST HY
ST PVC